Chapter 3 – Design Loads for Residential Buildings
3.11 References
ACI, Building Code Requirements for Structural Concrete and Commentary, ACI
Standard 318, American Concrete Institute, Farmington Hills, MI,
February 1999a.
ACI, Building Code Requirements for Masonry Construction and Commentary,
ACI Standard 530, American Concrete Institute, Detroit, MI, 1999b.
AF&PA, Wood Frame Construction Manual for One- and Two-Family
Dwellings, SBC High Wind Edition, American Forest & Paper
Association, Washington, DC, 1996.
ASCE, Minimum Building Loads for Buildings and Other Structures, ASCE
Standard 7-98, American Society of Civil Engineers, Reston, VA, 1999.
ASTM, Standard Test Method for Laboratory Compaction Characteristics of Soil
Using Standard Effort (D 698-91), American Society of Testing and
Materials, West Conshohocken, PA, 1998.
ASTM, Standard Test Method for Performance of Exterior Windows, Curtain
Walls, Doors and Storm Shutters Impacted by Missile(s) and Exposed to
Cyclic Pressure Differentials (ASTM E1886), American Society of
Testing and Materials, West Conshohocken, PA, 1997.
ATC, A Critical Review of Current Approaches to Earthquake-Resistant Design,
Applied Technology Council (ATC-34), Redwood City, CA, 1995.
Chalk, Philip L. and Corotis, Ross B., “Probability Models for Design Live
Loads,” Journal of the Structural Division, Vol. 106 No. ST10, American
Society of Civil Engineers, Reston, VA, December 1978.
Ellingwood, B., MacGregor, J.G., Galambos, T.V., and Cornell, C.A.,
“Probability Based Load Criteria: Load Factors and Load Combinations,”
Journal of the Structural Division, Vol. 108 No. ST5, American Society of
Civil Engineers, Reston, VA, May 1982.
Galambos, T.V. and Ellingwood, B., “Serviceability Limit States: Deflection,”
Journal of Structural Engineering, Vol. 112 No. 1, American Society of
Civil Engineers, Reston, VA, January 1986.
FPL, Performance of Backprimed and Factory Finished Hardboard Siding,
USDA Forest Products Laboratory, Madison, WI, 1999.
Galambos, T.V., Ellingwood, B., MacGregor, J.G., and Cornell, C.A.,
“Probability Based Load Criteria: Assessment of Current Design
Practice,” Journal of the Structural Division, Vol. 108 No. ST5, American
Society of Civil Engineers, Reston, VA, May 1982.
3-38 Residential Structural Design Guide