Quick-Connect Poster

YHT-685

Home Theater in a Box

Your System

Room

Layout

Speaker Placement After connection of the speakers place them so they appear in the

approximate positions as shown in the diagram above.

Yamaha created this package to greatly enhance your audio and home theater enjoyment. This Quick-Connect

Poster will help you get started. Follow the steps to connect the speakers ﬁrst. Then connect your DVD Player

and other components. Refer to your Owner’s Manuals as well as those that came with your other components

for complete instructions and precautions. Be sure that all components are not plugged in while making

connections. You will need the following which are not included in the package: Phillips screwdriver, wire

cutter/stripper, optional for wall mounting: brackets, toggle bolts, molly anchor screws or sheet metal screws.

Inspect Contents After unpacking, inspect the contents to conﬁrm you have the above items:  two front

speakers, B two surround speakers, C one center speaker, D subwoofer, 5 HTR-6030 A/V Receiver with

remote control, F DV-S5860SL DVD Player with remote control, G speaker wire, H subwoofer RCA cable,

I audio/video RCA cable, J non-skid pads, K screws, L support bases and adapters (attached to speaker stands)

M fasteners. Also included, but not shown, are AM and FM antennas and related Owner’s Manuals.





(4)

(2)

(12)

H I



Thread Speaker Wire Pass the

speaker wire through the underside of

speaker stand.

3 6

Turn Speaker Stand Right-Side-Up Remove

screw that holds adapter in, carefully set aside, then

remove adapter from speaker stand.

Thread Speaker Wire Make sure speaker wire

continues to pass through the adapter.

Attach Bottom Pads Apply pads J to bottom of

speaker stand as shown.

Front and Surround

Speaker Assembly

Cut speaker wire  to appropriate lengths for all speaker

connections. Connect speaker wire for center speaker C. The

positive (+) side of the wire with the white stripe attaches to

the red terminal. The negative (-) side attaches to the black

terminal. (See your HTR-6030 Owner’s Manual for more

information on speaker wire connections.)

Note: Fasteners M are included for secure speaker mounting.

See your NS-AP8600/SPS-8600 Owner’s Manual for further

instructions.

Connect Center

Speaker Wire

Connect RCA Cable Connect RCA cable I

to subwoofer D. Set subwoofer VOLUME control

to half-way mark and POWER to OFF. Connect

RCA cable to receiver from subwoofer.

WARNING Components must not be plugged

in while connecting them.

Connect Antennas to Receiver Locate AM

loop antenna and indoor FM antenna. Keeping

receiver unplugged, connect as shown. For more

information about obtaining clear reception and

grounding, see your Owner’s Manual.

Antenna Connection

Indoor

FM Antenna

AM Loop Antenna

YST-SW030

Subwoofer

HTR-6030 Receiver

HTR-6030

Receiver

HTR-6030 Receiver

Receiver

Connections

FRONT

RIGHT LEFT

CENTER

SURROUND

RIGHT LEFT

Connect Speakers

Positive (+) side of the wire

with white stripe attaches

to (+) terminal. Negative (-)

side attaches to (-) terminal.

CAUTION Receiver must

not be plugged in while

connecting speakers.

Connect

Front and

Surround

Speaker

Wire Positive

(+) side of the

wire with white

stripe attaches

to (+) terminal.

Negative (-)

side attaches to

(-) terminal.

Attach

Adapter to

the Speaker

using the

supplied screw

Push Together

the speaker and

adapter into the

speaker stand.

Attach adapter to

the speaker stand

using the screw

that was set aside

in Step 6.

-IN

v

v



Mounting Speakers

to Wall (Optional)

Fasten mounting screws

into a ﬁrm wall or wall

support. Leave 7/32 in.

between head and wall.

Hang the keyholes on

the speaker backs on the

protruding screws.

WARNING Please contact

a reliable source about

the best type of hardware

for your particular wall’s

construction. Secure

installation is purchaser’s

responsibility. See your

owner’s manual for

additional precautions.

Subwoofer

Connection

CD Player

Connection

Connect CD Player (optional) Connect RCA audio cables (not

included) to “CD” terminals on receiver as shown. If your CD Player

has digital output terminal, connect digital cable (not included) to

HTR-6030 Receiver Digital Input terminal. See your HTR-6030 Owner’s

Manual for more information.

HTR-6030 Receiver

CD Player

VCR

14 15

17 18 19

Enjoy the Yamaha Home Theater Experience

Be sure to put batteries in your remotes (see Owner’s Manuals for instructions).

Refer to your Owner’s Manuals for each component in your system for more information.

Now, relax and enjoy the unparalleled sound of your Yamaha Home Theater system.

YAMAHA ELECTRONICS CORPORATION, USA

6660 Orangethorpe Avenue

Buena Park, CA 90620

http://www.yamaha.com

Phone: 1-800-292-2982

Printed in USA

Part No. 685QCP

03/07

VCR Connection

DSS/Cable/HDTV Tuner Box

Video Monitor

Video Game Console

Connect VCR (optional) Connect audio/video cables (not included)

as shown.

NOTE VCR shown is for illustration purposes only. When using a hi-ﬁ-

stereo VCR, set the Tuner/Line switch on the VCR to “Line” position to

record from another source connected to the HTR-6030 receiver.

Connect DSS/Cable/HDTV Tuner Box (optional) Connect RCA

audio/video cables (not included) and optional optical cable (not pictured)

to “DTV/CBL” terminals on receiver to A/V OUT connections on Box as shown.

DSS/Cable/HDTV

Tuner Connection

Video Monitor Connection

Connect a Video Monitor (optional) Connect an RCA video cable

(not included) to receiver Monitor OUT from your video monitor as shown.

AUDIO/VIDEO IN

AUDIO/VIDEO OUT

HTR-6030 Receiver

DV-S5860SL DVD Player

HTR-6030 Receiver

Video Game

Console Connection

Connect Game Console or Video Camera (optional)

Connect RCA audio/video cables (not included) as shown.

Audio/Video

OUT

MD/CD-R Recorder

MD/CD-R

Player Connection

Connect MD/CD-R Recorder (optional) Connect RCA audio

cables (not included) to “MD/CD-R” terminals on receiver as shown.

WARNING Components must not be plugged in while connecting them.

Wait until all connections are made before plugging in your components.

AUDIO IN

AUDIO OUT

VIDEO IN

AUDIO/VIDEO OUT

DVD Player Connection

HTR-6030 Receiver

Connect DVD Player Top: Connect RCA audio/video cables I to receiver:

Yellow to “DVD,” Red to “Digital Input DVD Coaxial” as shown, and leave White

unplugged. Bottom: Connect audio/video cables to DVD player from receiver:

Yellow to “Video”, Red to “Coaxial”, and leave White unplugged.

Plug In receiver and other components. Power on the

receiver ﬁrst, and the other components next. Adjust volume on

the receiver. Please see each of your respective Owner’s Manuals for

recommended guidelines and settings.

MP3 Player

HTR-6030 Receiver

Connect MP3 Player (optional) Connect a 3.5 mm stereo mini cable

(not included) from line out or headphone jack of the MP3 player to the

PORTABLE input on the receiver as shown.

WARNING MP3 player volume must be turned down to half before connecting.

Consult the MP3 player’s Owner’s Manual for further instructions.

NOTE

The PORTABLE mini jack input takes priority over the AUDIO L/R jacks.

MP3 Player Connection