Fees
Service Fee - Estimate for Repair - Same Day Emergency Before 4 PM 79.00
Emergency Fee (Weekend and Weekday 5-8pm) 79.00
Saturday Same Day (8-4) 129.00
Emergency Fee (After 8pm) 149.00
Emergency Fee (Weekday after 5) 129.00
Saturday (Pre-scheduled 8-5) 79.00
Saturday (After 5pm) 199.00
Sunday (Late night) 249.00
Leak inspection (Not responsible for drywall repair) 260.00
Realtor Letter 165.00
Limited Access Fee 170.00
High Rise/Water Main Shut-down Fee 170.00
Flat rate pricing is based off of an average time to perform tasks in a SINGLE-FAMILY HOME. Work performed in multi-
family dwellings are subject to an additional cost due to the added time required to complete the project.
Permit Fee (130 X 3) 390.00
½ Hour Written Inspection 165.00
1 Hour Written Inspection 235.00
Winterization Starting at 695.00
De-winterization Starting at 555.00
Pipe Thawing (No Warranty) Service Fee/65.00 per ¼ hour($165 min.)
Basement Pumping Service Fee/65.00 per ¼ hour ($165 min.)
Water Pressure Test 85.00
Water Quality Test 145.00
Markup on Materials and Product 25%
Multi-Job Discount-Up to $50 10%
Cash Discount on Labor 10%
Credit Card Processing on Totals Over $1000 4%
Hourly 1-4 hours 165.00
Labor Hourly 1-4 hours 105.00
Please Read and Sign Invoice
• Coupons, discounts, and multi-job pricing not applicable for any drain cleaning.
• 30 Day, 1 time only warranty MAY be given if piping is in proper working condition and up to code.
• Camera inspection is required for any warranty on sewer mains.
• All drain cleaning, rodding, and auger pricing good for UP TO 1hr. After 1 hour a charge of $185/hr. will be
applied, and option will be given for a re-pipe or repair. If re-pipe or repair is chosen, then the Initial drain
cleaning charge is reduced by 50% with signed agreement and deposit.
• All piping in areas affected by a clogged drain is presumed to be in good condition, up to code, and can
withstand normal drain cleaning equipment and procedures. A re-pipe or repair may be necessary before or
after drain cleaning service and will be an additional cost.
Drain Cleaning
Hydro-jetting service (Up to 2 hours) 1150.00
Hydro-jetting service (Each additional hour) 255.00
Hydro-jetting service 3” lines or smaller (Up to 2 hours) 785.00
Hydro-jetting service (Each additional hour) 205.00
Cable sewer main through accessible cleanout 385.00
Manually remove blockage from sewage pump 385.00
Cable 2-4” drain through cleanout or floor drain 330.00
Vacuum floor drain only 165.00
Cable toilet with closet auger 255.00
Cable toilet by removing and resetting (no machine) 395.00
Cable sewer main by pulling and resetting toilet up to 100’ 605.00
Manually remove blockage from garbage disposal 185.00
Individual fixture drain cleaning with / 1/4” machine 255.00
Individual fixture drain cleaning with / ½” machine 330.00
Cable lavatory drain with p-trap replacement 350.00
Cable tub drain by removing and replacing drum trap cap 505.00
Chemical treatment 260.00
Add on chemical treatment +115.00
Add on fee for removal and replacement of cleanout cap +95.00
Remove and replace broken cleanout cap 245.00
Add on fee for interior, overhead cleanout. Drill, drain, pump. +445.00
Perform video inspection (Up to 1 hour) 260.00
Add on video inspection +120.00
Add on drain cleaning (1/4” cable) +130.00
Add on drain cleaning (3/8” cable) +195.00
Sewer Gas Smell
Sewer gas inside the home is usually a combination of methane, ammonia, and hydrogen sulfide. In small amounts the smell is
harmless but can get toxic when the gas reaches extremely large amounts of 150 PPM or greater.
Getting rid of a sewer gas smell in your home can be a small DIY fix or a sign that there is a much larger problem.
The best way to tell if it is a small, DIY project is to add plenty of water to EVERY drain in the house. To further ensure the trap seal
doesn’t evaporate you can add some mineral oil to the drain along with the water.
This includes:
Both basins of kitchen sinks
Both basins of laundry tubs
Floor drains in basements and laundry rooms (Sometimes located under the washing machine)
Seldom used fixtures like whirlpool tubs
Bar sinks
There are several other common causes for a sewer gas smell that may require more skill.
This includes:
Dirty tub/shower drains/laundry drains
Broken wax seal on 1 or more toilets
Full or backed up catch basin
Clogged sewer
Unsealed/dirty sewage pit
Many times, a sewer gas smell can be a sign that there is a broken pipe somewhere in the house. From a broken sewer line under
the concrete floor to a separated vent stack in the attic.
If the DIY solutions do not provide any results, we always recommend a smoke test as the next step.
A smoke test is simple but time-consuming process that involves pumping your homes sewer system with large amounts of harmless
smoke. The smoke fills the sewer and venting system. Any breaches in the system will then become visible to the plumbers
performing the test and then a diagnosis can be made, and repairs can begin.
Service fee to perform visual inspection of homes drains and exposed venting $149
Perform smoke test $1150
Leak Inspection
Please Read
A leak inspection is required ANY time there is a leak coming from a ceiling or a wall, and there
is no visible, active leak coming from above. Keeley’s Plumbing needs to be sure where the
leak is coming from before a diagnosis is given and any repair is performed. The following is
what you can expect.
1. Leak inspection fee of $260.00 per leak will be applied.
2. Expose walls/ceilings to investigate leak and diagnose the problem. Flat rate for 1-100
holes.
3. A price will be given for the repair.
4. If agreed upon, the initial cost will be reduced by 50% ($130.00) and the repair will be
completed and tested.
5. If not agreed upon, or if NO PLUMBING LEAK IS FOUND, the $260.00 balance is due, and
an estimate will be left behind.
6. Area will be broom swept cleaned after work is completed.
7. Keeley’s Plumbing is not responsible for wall repair.
Adler Chrome Single Handle:
$389 Installed
Adler Chrome:
$470 Installed
Adler Chrome Two Handle:
$379 Installed
Sous Pro Chrome:
$605 Installed
Delta Foundations:
$439 Installed
v
Cursiva Chrome:
$495 Installed
Kitchen Sinks
Install customer supplied kitchen faucet ($8 charge for each supply line) 259.00
Install customer supplied electronic faucet 319.00
Install customer supplied kitchen sink w/ faucet (basic install) 749.00
Install braided SS supply line 179/259
Install customer supplied garbage disposal 329.00
Install customer supplied dishwasher 509.00
Install braided stainless supply line for dishwasher 275.00
Install copper tee and ¼” angle stop 365.00
Install braided stainless supply line for refrigerator 10’/20’ 265/305
Re-connect service for new countertops (Basic install) 529.00
Replace continuous waste with proper sink drainage 435.00
1 Basket strainer 465.00
2 Basket strainers 480.00
Add-on P-trap or minor tubular repair +95.00
Re-pipe all kitchen sink drainage with new basket strainers 535.00
Lower waste arm and re-pipe all kitchen sink drainage 815.00
Install stainless steel basket strainer 225.00
Remove garbage disposal and replace with basket strainer and minor piping 365.00
Install customer supplied reverse osmosis system 510.00
Cable kitchen sink up to 25’ with ¼” cable, up to 1hr. 255.00
Cable kitchen sink up to 50’ with ½” cable, up to 1 hr. 330.00
Manually remove blockage from garbage disposal 185.00
Badger 5 1/2 HP:
• 1/2 HP Dura-Drive motor
• Galvanized steel grind components
$449 Installed
Evolution 3/4 HP:
• 3/4 HP Dura-Drive motor
• Stainless steel grind components
• Sound Seal technology
• Easily removable, quiet collar
sink baffle
$619 Installed
Toilets, Urinals, Etc.
Replace wax ring with new supply line (Up to 2 w/o repair) 285.00
Pull and reset toilet with new wax seal (Up to 2 w/o repair) 260.00
With minor flange repair 385.00
With full flange repair Starting at 585.00
Install urinal wax/foam ring 510.00
Install Fluidmaster PRO fill valve with new supply line 265.00
Install Fluidmaster fill valve and flapper 355.00
Install manufacturer toilet flapper 195.00
Add-on toilet flapper +120.00
Install new tank to bowl bolts and gasket 360.00
Install new flush valve, flapper , and bolts 425.00
Flush lever and Korky flapper replacement 265.00
Complete toilet rebuild 490.00
Install customer supplied toilet 365.00
Add on fee for minor flange repair +225.00
Add on fee for angle stop and escutcheon +145.00
Add on fee for full flange repair Starting at 380.00
Delivery +79.00
Additional fee for “clean side” toilet +95.00
Install white, plastic, slow-closing toilet seat 235.00
Cable toilet w/ manual auger 245.00
Cable toilet by removing and resetting (No Machine) 405.00
Install angle stop for toilet with new supply line 235.00
Install toilet flush lever 225.00
Champion Pro Tall, Round Bowl:
$709 Installed
Champion Pro Tall, Elongated Bowl:
$739 Installed
Cadet Pro Tall, Round Bowl:
$669 Installed
Cadet Pro Tall, Elongated Bowl:
$699 Installed
Wellworth Standard, Round Bowl:
$659 Installed
Wellworth Standard, Elongated Bowl:
$689 Installed
Highline Tall, Round Bowl:
$729 Installed
Highline Tall, Elongated Bowl:
$729 Installed
Bathroom Sinks, Faucets
Replace single handle faucet cartridge 305.00
Replace double handle valve stem/cartridge 260.00/345.00
Install customer supplied 4” lavatory faucet (extra charge for supply lines) 299.00
Install customer supplied 8” lavatory faucet (extra charge for supply lines) 339.00
Rebuild marvel adapter and install new p-trap 425.00
Replace angle stop 180.00/290.00/90.00 add.
Replace angle stop with new supply line (Each) 220.00
Replace pop-up assembly 245 .00
Install commercial grid strainer (Kohler, Chrome) 350.00
Replace p-trap 245.00
Up-charge for pedestal sink +105.00
Install customer supplied bathroom vanity up to 30” Starting at 770.00
Install customer supplied pedestal sink Starting at 830.00
Cable sink up to 25’ with ¼” cable, up to 1hr. 255.00
Cable sink up to 50’ with ½” cable, up to 1hr. 330.00
Keeley’s Plumbing does not recommend repair on any lavatory or kitchen faucet.
Labor costs for repair vs. replacement are usually equal.
Repairs are NOT warrantied.
Tubs/Showers
Replace Moen 1225 cartridge 305.00
Replace Moen Posi-Temp cartridge 365.00
Replace Delta pressure balancing cartridge 405.00
Replace any Price Pfister single handle cartridge 390.00
Replace Delta Seats/Springs 285.00
Replace Kohler 2-part cartridge and pressure balancing assembly 415.00
Install customer supplied tub/shower/sink cartridge (No Warranty) 265.00
Add-on trim kit installation for tub/shower starting at 340.00
Install new tub/shower trim kit (Basic, chrome) starting at 410.00
Replace single handle on tub/shower valve 205.00
Replace 2 handle valve stems 405.00
Replace 3 handle valve stems 595.00
Add on 2 or 3 handle tub/shower trim starting at +270.00
Install customer supplied shower valve (basic install) (No Warranty) 760.00
Install Moen Posi-Temp shower valve with Chateau trim 935.00
Install Moen Posi-Temp shower valve with 3 Hole conversion plate 1095.00
Replace “Toe Tip” and overflow plate (Chrome) 310.00
Replace “Toe Tip” drain only (Chrome) 225.00
Tub Shroom® silicone hair catcher 25.00
Replace waste and overflow with new poly/chrome 540.00
Replace waste and overflow with new PVC/chrome 635.00
Replace waste and overflow AND p-trap with poly/chrome 720.00
Remove drum trap and install new PVC p-trap with poly waste and overflow 995.00
Add-on Drywall Removal (Does not include drywall repair) +85.00
Install new brass shower drain and PVC p-trap 605.00
Replace p-trap (May need new waste and overflow) 435.00
Replace tub spout with chrome 235.00
Replace shower head 230.00
Install customer supplied showerhead 195.00/85.00
Posi-Temp shower valve:
$935 Installed
Posi-Temp shower valve with 3-hole
conversion plate:
$1095 Installed
Pumps
Install economy sump pump with new check valve 480.00
Install Liberty 1/3 HP sump pump with new check valve 595.00
Install Liberty ½ HP sump pump with new check valve 635.00
Add-on Fee for Liberty Brick sump pump pedestal +25.00
Add-on fee for re-piping BBU with new primary installation +170.00
Install Liberty ejector pump with new check valve 845.00
Manually remove blockage from sewage pump 390.00
Install economy sump pump in under-sink system 610.00
Install customer supplied sump pump (No Warranty) 360.00
Install customer supplied BBU system (No Warranty) 550.00
Install customer supplied sewage pump (No Warranty) 465.00
Install 1 ½” quiet close check valve 235.00
Install 2” quiet close check valve 335.00
Install vertical float switch, sump pump 265.00
Install vertical float switch, sewage pump 425.00
Re-pipe sump pump discharge with new check valve (up to 10’) 365.00
Install new plastic ejector pit lid 225/395
Install new plastic sump pump lid 105/180
Install Liberty 441 battery backup system (Basic install) 1305.00
Install Liberty 442-10A battery backup system (Basic install) 1780.00
Install Liberty 442-10A-EYE battery backup system (Basic install) 2115.00
Install Zoeller Aquanot gel battery 575.00
Install Basement Watchdog acid battery 515.00
New Primary Pump 10% off with Battery back-up purchase
Laundry, Utility Room
Supply and install brass laundry faucet 440.00
Install new SS supply lines for washing machine 290.00
Replace boiler drain with new stainless steel supply 265/430
Replace boiler drains 225/370
Install ½” gas cock 255.00
Install flexible gas supply line 295.00
Install flexible gas supply line with new gas cock 390.00
Install ½” ball valve 290.00
Install ¾” ball valve 370.00
Install ¾” ball valve on water main with village shut down 480.00
Install 1” ball valve 440.00
Re-pipe water meter ( Plus all permit fees) 695.00
Bypass and remove water softener 485.00
Install frost-proof silcock 355.00
Limited access silcock 435.00
Pipe Replacement
Copper and Black Iron
24”
36”
48”
60”
½”
340
380
420
460
¾”
390
430
470
510
1”
420
460
490
530
1 ¼”
610
650
690
730
Pipe replacement over 5’ = Minimum 60” charge applies + material cost + markup
Each branch line (tee) is a 24” charge
Atmospheric Vent
40 Gallon $1750.00
50 Gallon $1825.00
75 Gallon $2540.00
Powervent
40 Gallon $2585.00
50 Gallon $2695.00
75 Gallon $3250.00
Atmospheric Vent and Powervent Add-Ons
Ball Valve $95.00
Saddle valve to angle stop $120.00
Galvanized/Flex Conversion $165.00
Flexible Gas Conversion $150.00
Drip Pan with 1” Piping $250.00
Expansion Tank $215/340
Return/Re-circulating line $205.00
Tankless Systems
NPE 240-A $5005.00
NPE 240-S $4775.00
Add-On Navi-Link WiFi Controller $340.00
Add on Navi-link WiFi Controller $290.00
Water Heaters
Drain water heater / recharge air chambers (may require new valves) 255.00
Install customer supplied water heater (40 or 50 gal.) (No Warranty) 705.00
Install Bradford White 40 gallon 1750.00
Install Bradford White 50 gallon 1825.00
Install Bradford White 75 gallon 2540.00
Install Bradford White 40 gallon POWERVENT 2585.00
Install Bradford White 50 gallon POWERVENT 2695.00
Install Bradford White 75 gallon POWERVENT 3250.00
Add on ball valve +95.00
Saddle valve to angle stop +120.00
Galvanized/Flex conversion +165.00
Flexible gas conversion +150.00
Drip Pan with 1” piping +250.00
Expansion tank +215/340
Return/ Re-circulating line installation +205.00
Navien NPE 240-A (basic install) 5005.00
Navien NPE 240_S (basic install) 4775.00
Add on Navi-link Wi-Fi controller 340.00
Tankless water heater flushing/service 325.00
Supply and install gas control valve 765.00
Install customer supplied gas control valve (No Warranty) 505.00
Install Watts hot water recirculating system 840.00
Install dielectric union 275/380
Install T & P valve with piping 345.00
New install expansion tank 410.00
Expansion tank swap out 320.00
Replace ¼” saddle valve with tee and angle stop 365.00
Pipe Repair
2’ 4’ 6’ 8’ 10’ 12’ 14’ 16’ 18’ 20’
1 ½” 265
305
345
385
425
465
505
545
585
625
2” 280
320
360
400
445
485
525
565
605
645
3” 350
390
430
470
510
550
590
630
670
710
4” 530
570
610
650
690
730
770
810
850
890
6“ 760
800
840
880
920
960
1000
1040
1080
1120
• Minimum 2’ for any branch line in respective size in addition to linear repair
• $25 for each stainless adapter 3” and under
• $105 for each stainless adapter 4” and under
• Replacement of cast-iron piping price is doubled
• Additional charges may apply
