R
■■
II
r,
um,
v
555 WRIGHT WAY
CARSON CITY, NV 89711
Reno/Sparks/Carson City (775) 684-4DMV (4368)
Las Vegas Area (702) 486-4DMV (4368)
dmv.nv.gov
MOTOR VEHICLE EQUIPMENT REQUIREMENTS
HEADLAMPS NRS 484.549
At least 2, located at a height of not more than 54 inches or less than 24 inches from the ground. Measured from
the center of the lamp to the level ground or device upon which the vehicle stands when the vehicle is unloaded.
TAIL LAMPS NRS 484.551
Two red tail lamps mounted on the rear
Visible from a distance of 500 feet to the rear
Mounted at the same level, as widely spaced as practicable
At a height of not more than 72 inches or less than 15 inche
s from the ground, measured from the center of the
lamp
Wired to be lighted whenever the vehicle head lamps or auxiliary driving lamps are lighted
* Vehicles manufactured before July 1, 1969 must have at least one tail lamp if they were originally
equipped with only
one tail lamp.
STOP LAMPS NRS 484.555
Mounted on the rear of the vehicle
Display a red, amber or yellow light
Visible from at least 300 to the rear in normal sunlight
Be activated upon application of the brake
May be incorporated with the tail lamp
* Vehicles manufactured before July 1, 1969 must have at least one stop lamp if they were originally
equipped with only
one stop lamp
TURN SIGNALS NRS 484.557
Located on the front and rear of the vehicle
Must indicate the intention to turn by flashing lights in the direction toward which the turn is to be made
Lamps showing in front must be mounted on the same level and as widely spaced as practicable, must emit a
white or amber light when signaling
Lamps mounted on the rear must be on the same level and wid
ely spaced laterally as practicable, must emit red
or amber light when signaling
Visible in normal sunlight from a distance of not less than 500 feet
* Vehicles manufactured before July 1, 1969, less than 80 inches in overall width, not originally equipped
with electric turn signals are exempt
LICENSE PLATE LAMP NRS 484.551
Passenger vehicles, bus and trucks under 80 inches in overall width must be equipped with a white lamp
mounted to illuminate the rear license plate
Must be visible from a distance of at least 50 feet to the rear of the vehicle
Wired to be lighted whenever the vehicle head lamps or auxiliary driving lamps are lighted
Page 1 of 3
Motor Vehicle Equipment Requirements cont’d
ADDITIONAL LIGHTING NRS 484.561 (Buses and trucks over
80 inches in width, manufactured after January 1,
1970)
Front, two cl
earance lamps, on at each side, and three identification lamps, grouped in a horizontal row, with lamp
centers spaced not less than 6 nor more than 12 inches apart, permanently mounted, as close as practicable to
the vertical centerline, except if the cab of the vehicle is not more than 42 inches wide at the front roof line.
Rea
r, two clearance lamps, on each side, and three identification lamps, grouped in a horizontal row, with lamp
centers spaced not less than 6 nor more than 12 inches apart, permanently mounted, as close as practicable to
the vertical centerline, except if the cab of the vehicle is not more than 42 inches wide at the front roof line.
Side, two sid
e marker lamps, on at or near the front and one at or near the rear
FENDERS NRS 484.541
Fende
rs must be designed not to endanger any persons or property
HORN NRS NRS 484.607
Cap
able of emitting audible sound under normal conditions from a distance of not less than 200 feet
Must not emit an unreasonably loud or harsh sound.
May not be equipped with a whistle, bell or siren
MUFFLER NRS 484.611
Equippe
d with a muffler in good working order
Must be in constant operation
MIRRORS NRS 484.617
Located to ref
lect to the driver a view of the highway for a distance of at least 200 feet to the rear
WINDSHEILD WIPERS NRS 484.621
Self Operating
Capable of effectively clearing the windshield to provide clear vision through the windshield for the driver in the
rain, snow, or other moisture.
WINDOW GLASS NRS 484.623
Must be eq
uipped with safety glazing materials
SAFTEY BELTS NRS 484.641
Passeng
er vehicles manufactured after January 1, 1968 must be equipped with lap belts for use in the front
seating positions
Passeng
er vehicles manufactured after January 1, 1970 must be equipped with shoulder harnesses for use in the
front seating positions and lap belts for use in the rear seating positions
BRAKES NRS 484.593, 484.595
Must be equipped with brakes acting on all wheels that meet requirements of 484.593 and 484.595
MAXIMUM WIDTH NRS 484.759
102 Inche
s excluding: Mirrors, lights, other safety devices, and any hardware required for an awning, which does
not extend beyond any mirror that is attached to a recreational vehicle.
If equipped
with pneumatic tires, maximum width from the outside of the wheel and tire to the outside of the
opposite outer wheel and tire must not exceed 108 inches, and the outside width of the body of the vehicle or the
load must not exceed 102 inches
Page 2 of 3
Motor Vehicle Equipment Requirements cont’d
MAXIMUM HEIGHT NRS 484.7385
Passeng
er Vehicles, lowest portion of the body, measured from the surface on which the vehicles stands, may
not exceed 24 inches
Tru
ck or other motor vehicles have a manufacturer’s gross vehicle weight rating of:
-4,500 pounds or less, 28 inches
-4,500 to 7,501 pounds, 30 inches
-7,501 to 10,001 pounds, 32 inches
Measured fro
m the level ground to a portion of the body or parts attached to the body which have not been added
or altered from the manufacturer’s original body design
Doe
s not apply to vehicles manufactured prior to 1935 or with a gross vehicle weight of 10,001 pounds or more
December 2003
Page 3 of 3