TOP LEG
BASE LEG
Standing Round Table
Place the spacer on top of the base leg crossbar, and make
sure it drops into place. Then, place the top leg on the spacer,
lining up the holes. Line up the bolt, washers, and nut in order
to sandwich the legs and hold everything in place. Using the
wrench to hold the nut sll, turn the bolt with the Allen Key
unl ghtly fastened.
NOTE: The base leg has a lower crossbar than the top leg.
x1
x1
x1
ROUND TABLE TOP
x4
HAND SCREW
x1
BOLT
x2
WASHER
x1
SPACER
x1
NUT
Holds up to
300 lb (136 kg)
1
2 People
Required
x1
17MM WRENCH
x1
5MM ALLEN KEY
REQUIRED TOOLS (Included)
2
(800) 207-2587
Patent and trademark informaon: vari.com/patents | ©2022 Varidesk, LLC. All rights reserved.
NOTE: We recommend assembling the table face down in the
box to prevent any surface scratching.
Flip the assembled legs over, aligning the holes in the frame
with the pre-drilled connecon points on the underside of the
table top.
Use the hand bolts to fasten the legs to the table top, and ghten
unl rmly in place. With the assistance of another person, li and
ip the assembled table to an upright posion.
Adjust the footpads to level the table as needed.
3
